Wednesday, June 4, 2014

DIY Framed Name Decor

I have a big wall in my daughter's room that no matter what I put on it, everything always looked lost.  I wanted something to take up a lot of the wall space but wasn't about to pay the prices most stores were asking for a big piece of framed decor.  Especially because there wasn't really anything that I found that I was crazy about. 

I decided to make her name out of wooden letters and frame them.  I knew this would be perfect because not only would it be fairly cheap but I could customize it to match the colors in her room.



Supplies I used:

  • 6 5x7 silver frames from the dollar store
  • 6 wood letters I purchased for .99 each at Michael's
  • 6 pieces of scrapbook paper for .59 each at Michael's ( I only ended up using 3 )
  • Wired ribbon
  • White acrylic paint (.59 at Wal-Mart )
  • Spray paint
  • Foam brush
  • Hot glue gun
I started out by spray painting all of the frames white with some spray paint I already had on hand.  I bought the silver ones because I figured they would be easier to paint over then the black ones the dollar store usually carries.  Why have they not started carrying white frames yet?! Anyway, these are the frames I used.



I removed the glass and backing and spray painted each frame with two coats of white paint.


A little tip:  If you bend back the little clips that hold the back onto the frame, it props the frame up and  makes painting easier because you can paint the sides much quicker and get a full even coat.


While the frames dried, I started on the letters.

I purchased wood letters at Michael's but I wanted them to be white.  Now you can completely skip this step if you actually purchase the wood letters that already come white.  But they were more than $1 extra per letter, so to make this project as cheap as I could, I figured I'd just paint them myself.


I used a cheap foam brush and some acrylic paint that I had purchased at Wal-Mart for a previous project.  I have pretty much every color of paint because for .59, how can you not buy one every time you go into the store??



I gave the letters two coats of paint, letting each coat dry for about 2 hours.



To match my daughter's room colors, I bought two different pieces of scrapbook paper at Michael's.  I measured each one to fit a 5x7 frame and using my paper cutter, cut each piece down to size.



After everything was dry and ready, it was time to assemble each frame.

I placed a piece of paper into each frame and put all the frames back together. 



 I hot glued each letter to the glass.  It's an absolute necessity to use a high temperature glue gun because with a low temperature, the wood letters are too heavy and they'll slide right off.


Am I really that lazy that I didn't even fully remove the sticker from the back?  Yes.  Yes I am!

After all the letters were applied to each frame, I started on the bows.


I decided the length I wanted for the ribbon and measured each piece.  I tied them into a bow, leaving a lot of excess on the bottom so I could hot glue the ribbon to the back of the frame.


I placed a few dabs of glue onto the ribbon and glued them to the back of each frame.



And they were done!


I just hammered a small nail into the wall, hung each frame, and tried covering the nail with a bow as much as I could.  And that's it!




Sorry about the reflection in a few of the frames.  I tried my best :)


For about $12 I have a really cute wall decor piece for my daughter's room that not only takes up a pretty good amount of wall space, but it's personalized just for her!



Friday, May 30, 2014

Healthy Almond Joy Oatmeal

Anytime I'm given the opportunity to eat something for breakfast that incorporates chocolate in it, you can guarantee that I'll be eating it.  But when it mixes coconut with said chocolate, I'll most likely be eating it a few times a week.  This oatmeal is so perfect because it has all the flavor of an Almond Joy candy bar, but with healthy ingredients.  Makes ya wanna just jump for JOY doesn't it?



Ingredients:


  • 1/2 cup old fashioned oats
  • 1 cup Unsweetened Vanilla Almond Milk
  • 2 Tbsp. sliced almonds
  • 1 Tbsp. dark chocolate chips
  • 2 Tbsp. shredded sweetened coconut ( I tried it with unsweetened and I didn't care for it )
  • pinch of salt

Directions:

Mix together almond milk, salt, and oats.  Prepare the oats according to the directions on the package.  ( I use the microwave).  

While still hot stir in almonds, chocolate chips, and coconut.  Serve warm.

Enjoy!






Wednesday, May 28, 2014

Last Day of School Countdown Printable




Click HERE to download the printable.

With the school year almost over, my kids are getting extremely anxious for summer time.  So I made this simple but really cute countdown to let them know how many days were left until they were free little birds!  Plus, it beats having to answer the question "how many days left NOW?" every morning.  All I did was print it out, put it in an 8x10 frame and I use a dry erase marker to change the number every morning.  I put it on a table by our front door so they can see it each morning before they leave.

After a while I'm sure I'll change it to a countdown until school starts.  But that won't be for my kids! It will be for me!  ;)

Happy printing!




Tuesday, May 27, 2014

Pink & White Two-Toned Nightstand Makeover

It's not very often I can say that something turns out the EXACT way I imagine it.  But this is one project that did!  I knew the look I wanted for this nightstand for my daughter's room.  I had everything so beautifully imagined in this little head of mine. And I can happily report, that this is exactly what I wanted.



Here's the nightstand before:





I had purchased this nightstand with a matching dresser from someone local for $50.  I was so excited because for the quality and size of this furniture, it was an amazing deal! It had a few scratches and dents, a broken corner, and some kind of weird marks on it that I couldn't tell you what they were.  But there's nothing that a coat of paint and some elbow grease can't fix.  So I knew I'd have a little bit of work ahead of me.

To get started, I removed all the drawers and using an air compresser, I blew out all the dust and dirt that was laying on the bottom and sides.

I sanded the whole nightstand down with 150 grit sandpaper.  I didn't do a lot of sanding because I knew I'd be priming it.  So a light sanding worked just fine.

Before I got right into painting, there was some work to be done.  I needed to fix that chipped/broken corner.  Here's what it looked like:



There was this huge gash of wood missing from the side.  So I used some Elmer's wood filler and a plastic scraper to smooth it over and fill in the missing piece.  I also filled it any dents or holes that needed a little work, too.




After letting it dry overnight, I sanded it with 100 grit sandpaper, by hand.  I didn't want to use my electric sander because I didn't want to risk having the pressure of the sander leaving holes in the wood filler.  I sanded off as much excess filler as I could, making sure it was a smooth as I could possibly get it.


Now it was time to prime it!

I used Zinsser Cover Stain Primer in white.  I like to use this primer for wood or dark colored furniture.  The beauty part of this primer is that there's no sanding required.  But for some reason, I just can't seem to skip sanding.  Even if it's just a light one, I always seem to maybe make a little more extra work for myself.  I have no idea why!


The rollers I used to prime and paint the nightstand was a 4 inch foam roller that I had picked up at Home Depot.


I primed all the drawers first.



Now I know that some people say that primer isn't that important and it doesn't have to be perfect.  I kind of agree with that, in a way.  It doesn't have to be perfect, but you don't want runs and bubbles that you will see once it's painted.  So I do try and take my time and get a nice clean finish, even if it is just primer.

After the drawers were finished, I started on the nightstand.




I like to do two coats of primer whenever I can.  Especially when going from dark furniture to light.  I wait about 2 hours between coats.

After the two coats were applied, I let it dry overnight.  Now it was time to paint!

I used Behr Satin Enamel paint in the color Popped Corn.



I used the 4" foam roller for the big surfaces and a Purdy XL Medium Stiff Nylon brush for the detail and hard to reach spots.  You don't want to cheap out on a brush because the last thing you want to be doing is picking out tiny brissles out of your freshly painted surface.


I gave the nightstand and the drawers two coats of paint.




After the paint dried overnight, I gave the middle of each drawer two thin coats of pink paint.  The paint I used was by Behr in the color Musical Mist.  It was the perfect shade of pink that I wanted.  It's a pale pink that I thought would look really clean and nice against the white.


This was actually the sample size that I purchased because I knew the inside of the drawers wouldn't take much paint.  The sample cost me around $2.50.

I decided I wanted to change the knobs on the nightstand as well so I went with these crystal like knobs that I had picked up at Home Depot. ( Are you seeing the slight obsession I'm developing when it comes to shopping at Home Depot??)



The last step was to apply a top coat to protect it from any scratches or normal wear and tear. And also for the fact that this was going in a 6 year old's room and Lord knows what she could do to this thing after a while.  So for this I used Polycrylic by Minwax.  I didn't want to use Polyurethane as I've heard it yellows over time.  So I decided to go with this one.  I applied it, but only to the top of the nightstand.


And it was finally finished!


Still on the look out for the perfect lamp to top this little beauty, but have had no such luck yet!



Here's the before and after:

I'm so happy with it.  And more importantly, my daughter absolutely loves it!  I think it's fit for princess!


Saturday, May 24, 2014

Easy Crockpot Pulled Pork Sandwiches

I'm not really a big pork eater, but I do have to admit that these sandwiches are ah-mazing! They're soft,  and messy, and full of BBQ flavor!  And the best part is, you set your crockpot and 7 hours later you have a delicious BBQ dinner that everyone will love!



Ingredients:


  • 6 center cut pork chops
  • 1/4 cup water
  • 1/4 tsp. black pepper
  • 1/2 onion, sliced thin
  • 1/2 bottle of your choice BBQ sauce ( I use Kraft Original )
  • 2 Tbsp. honey
  • 1 Tbsp. brown sugar
  • 1-2 Tbsp. cornstarch (optional but will help thicken sauce)
  • Rolls or bread of choice

Directions:

In your crockpot, combine 1/4 bottle of BBQ sauce, honey, brown sugar, and water.  Stir to combine.
Lay your pork chops in a single layer (as many as you can fit) and then top with some more BBQ sauce and some sliced onions.
Add in remaining pork chops and top with remaining sauce and onions.  Sprinkle with pepper.

Cook in the crockpot for 7 hours on low.

When it's finished cooking, remove all pork chops and shred.  You can either use a fork and knife, or place the pork chops in your stand mixer for super easy shredding.

Add the cornstarch to the sauce in the crockpot and stir to thicken.  Place shredded pork back into the sauce and stir.  Keep warm until ready to serve.

Enjoy!